Gate Parts & Welding in Carrollton, TX
If your gate is dragging, cracking, or failing an HOA inspection, All Star Gate Repair Dallas is the team to call. We’ve been diagnosing and fixing gate systems across Carrollton — from the older cedar installations on the east side to the ornamental iron slide gates in the master-planned communities near Hebron Parkway — for 16 years. Our Gate Parts & Welding crew carries stock parts and welding equipment on every truck, so most jobs wrap the same day. Call (940) 326-5404 for a free estimate.
Why All Star Gate Repair Dallas Is Carrollton’s Preferred Gate Parts & Welding Company
Carrollton homeowners and HOA property managers across Carrollton have left us 343 verified reviews averaging 4.9 stars — not because we talk a good game, but because Jason Robinson, our owner and Lead Technician, is personally on the job. That means the person who answers for the work is the person doing the work. No rotating subs, no guesswork handoffs.
We know Carrollton’s specific failure patterns cold: the clay heave cycle in 75010 that cracks bottom-rail welds after a single wet winter, the shallow post footings in 75006 and 75007 that make new hinges fail within a season, and the ARB finish codes that govern every ornamental iron replacement in the Hebron Parkway corridor. Generic gate contractors diagnose what they can see. We diagnose what the soil has been doing for the last decade.
Response to most Carrollton addresses runs same-day or next morning. Whether you’re off Old Denton Road, near the intersection of Josey Lane and Frankford, or in a community backing up to the President George Bush Turnpike, we’re familiar with the territory and structured to move fast.
Our Gate Parts & Welding Services in Carrollton
Custom Welding
Custom welding is the service Carrollton HOA communities need most, and it’s where a specialist earns the fee a handyman cannot. In the master-planned subdivisions along Hebron Parkway in 75010, Architectural Review Boards maintain registered finish schedules — almost always flat-black or oil-rubbed-bronze powder coat on ornamental iron. Any welded repair or fabricated panel section must match that registered color code exactly, or the homeowner receives a formal violation notice. We came to a home in the Villages of Carrollton subdivision near Hebron Parkway where a Viking swing gate had developed a hard bind every time temps dropped. The black clay under the left post had heaved nearly two inches through the previous wet winter, torquing the bottom rail weld until it cracked at the picket collar. We re-set the post footing, dressed the cracked weld, applied a color-matched flat-black powder-coat touch-up, and confirmed the replacement rail profile matched the community’s ARB-approved panel spec before closing the job — no compliance exposure for the homeowner.
If the original manufacturer no longer makes your gate’s profile, we fabricate a matching section in-house. No outsourcing, no waiting a week for a subcontracted metalwork shop.
Post Replacement
Carrollton sits on Blackland Prairie black clay soil — the kind that heaves two to three inches in a wet winter and contracts sharply in a 100°F summer. That ground movement is the dominant force behind gate failures here, and no other repair holds if the post isn’t right. In the east-side neighborhoods in 75006 and 75007, original gate posts were typically set in shallow concrete footings that made sense in the 1970s but are no match for decades of clay cycling. We routinely find posts that have tilted 2–3 inches off vertical even though the fence line looks straight from the curb. A post replacement in those neighborhoods means excavating to current footing depth standards — not patching around a compromised pour — and setting the new post so that whatever hinge or operator you put on it actually has a stable anchor.
A typical post replacement in Carrollton runs $320–$680 depending on post diameter, footing depth required, and whether the operator mount needs to be repositioned. We quote before we dig.
Rail Repair
Welded picket joints crack at the bottom rail on ornamental iron gates in 75010 HOA communities after a single wet-winter heave cycle — but because the gate still swings, most homeowners delay the repair until the ARB flags the visible crack or the panel sags outside the approved alignment envelope. By then, the stress has usually migrated to the adjacent pickets. We repair rail cracks structurally, not cosmetically — full weld penetration, ground flush, and finished to match the community’s approved coating — so the repair doesn’t re-crack at the first freeze. Rail repair in Carrollton typically runs $180–$420, depending on crack length, panel weight, and whether the post situation contributed to the failure.
Hinge Replacement
Hinge replacement on Carrollton’s east-side cedar gates is one of those jobs where doing it wrong costs twice. If the post has been heaved by clay movement — which it almost certainly has in 75006 and 75007 — installing a new hinge on the existing post just transfers the tilt stress directly into the new hinge barrel. The pin bends before the wood shows visible rot, and the homeowner calls back in six months thinking they got a bad hinge. We check post plumb before touching the hinge hardware. If the post needs resetting, we say so upfront. Hinge replacement in Carrollton runs $95–$260 per hinge set depending on gate weight and hinge grade.
Additional Parts & Hardware
Beyond the major four, we carry gate rollers, latches, locks, and operator hardware for same-day swap on most systems. A gate roller replacement in Carrollton typically runs $110–$250; latch and lock hardware runs $85–$195 installed.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Carrollton
The master-planned communities near Hebron Parkway run mostly LiftMaster and Viking automatic operators on their ornamental iron gates, while older installations across 75006 and 75007 often have Linear or Mighty Mule openers that have been in service for well over a decade. We’re factory-familiar with all of them — LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule — and we stock common replacement parts for these brands on the truck. That means Carrollton customers aren’t waiting three days for a part to ship before the job can close.
Common Gate Parts & Welding Problems We See in Carrollton Homes
- Bottom-rail weld cracks on 75010 ornamental iron gates. One wet winter of clay heave is enough to crack the weld at the picket collar on ornamental iron panels. Homeowners often miss it until the ARB flags it during a community inspection cycle — by which point the panel has already shifted outside the approved alignment envelope.
- Hinge failure on shallow-set east-side posts (75006/75007). Replacement hinges installed on the original shallow-poured posts fail within a season. The clay-heaved post transfers ongoing tilt stress into the new hinge barrel, bending the pin, regardless of the hinge’s rated capacity.
- Hail damage that violates HOA panel-flatness standards. Hailstorms are routine in this corridor of North Texas. They dent aluminum or thin-gauge steel panels in ways that don’t affect gate function but do violate HOA panel-flatness standards. Homeowners are often unaware they have an ARB violation until the next community inspection triggers a formal notice.
- Electrical faults misdiagnosed as motor failures. The DFW region’s extreme moisture swings — drought summers over 100°F followed by wet, freezing winters — corrode the underground conduit and wiring runs that power automatic gate operators throughout Carrollton. These nuisance faults are frequently misread as motor failures, leading homeowners to replace an operator that’s actually fine while the real problem stays underground.
Pricing for Gate Parts & Welding in Carrollton, TX
Here’s what Carrollton customers typically see on the invoice:
- Hinge replacement: $95–$260 per set
- Post replacement (including footing): $320–$680
- Rail repair (weld + finish): $180–$420
- Custom welding / panel fabrication: $250–$900+ depending on profile complexity and ARB finish requirements
- Gate rollers: $110–$250 installed
- Latch & lock hardware: $85–$195 installed
What moves a job toward the higher end of a range is almost always the post condition — if the footing needs full excavation and reset, that adds labor and concrete cost. ARB-compliant powder-coat matching on custom welds also adds to the ticket versus a plain paint finish. We quote every job before any work starts, and Carrollton residents get the same pricing structure as any other market we serve — no premium for HOA paperwork. Call (940) 326-5404 for a free on-site estimate.
We Also Serve Cities Near Carrollton
Our trucks run daily throughout the north Dallas corridor. Along with Carrollton, we regularly serve Addison, Plano, and Richardson for gate parts, welding, and full repair work. If you’re a property manager overseeing gates across multiple communities in this area, we can coordinate service across locations in a single call. Reach us at (940) 326-5404.
Serving Carrollton, TX — Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Carrollton
Yes, ARB-compliant repairs and panel replacements are a routine part of what we do in the 75010 communities. We document the existing finish spec before any work starts — typically flat-black or oil-rubbed-bronze powder coat — and match the replacement or welded section to the community’s registered color code. We can also provide written documentation of the materials and finish used if your ARB requires it for approval records. Call (940) 326-5404 to schedule a pre-repair site review.
It’s almost never a welding quality problem — it’s a soil problem. Carrollton’s Blackland Prairie clay heaves significantly between wet winters and dry summers, and that ground movement torques gate posts and bottom rails cyclically. A weld that survives the summer cracks when the clay swells the following winter. The fix isn’t a better weld on the same unstable post; it’s re-setting the post footing to depth, then repairing the weld with a finish that matches your ARB-approved spec. We address both in the same visit. Call (940) 326-5404 for a free diagnosis.
Probably yes, but we confirm with a level before quoting. In the 75006 and 75007 neighborhoods, posts set in the 1970s and 80s were poured in shallow footings that clay movement has since tilted 2–3 inches off vertical — even when the gate looks aligned from a distance. That tilt binds hinges, misaligns the operator, and makes the gate drag across the ground or the stop. A new hinge on that post will fail the same way. If the post has moved, we re-set it properly so any hardware we install actually holds. Call (940) 326-5404 and we’ll tell you what we’re looking at on the first visit.
In most Carrollton HOA communities, it’s not cosmetic — it’s a compliance issue. ARBs in the Hebron Parkway corridor typically enforce panel-flatness standards as part of the approved gate appearance spec, and a dented panel can trigger a formal violation notice at the next community inspection cycle even if the gate operates perfectly. We assess the dent severity, advise whether it falls within violation territory, and either repair or fabricate a matching replacement panel. Don’t wait for the HOA letter. Call (940) 326-5404 for an honest assessment.
Yes — in-house fabrication is one of the core reasons Carrollton customers call us over a general contractor. We measure the existing picket spacing, rail dimensions, and profile geometry, then fabricate the matching section in our shop without outsourcing the metalwork. For HOA communities, we match the finish spec to the community’s registered color code — flat-black or oil-rubbed-bronze powder coat in most Carrollton subdivisions — so the replacement section is indistinguishable from the original panels and passes ARB review. Call (940) 326-5404 to schedule a measurement visit.
Reviewed by Jason Robinson, Owner & Lead Technician at All Star Gate Repair Dallas, serving Carrollton since 2009.